PRE Filters
F Series
The F series features progressive density fiberglass media pad allowing for full depth filtration. The adhesive coated fibers purpose to retent dusts which have been captured,thus minimizing dusts by pass. Frame: Strength Beverage cardboard Ex: Canada or reusable alumunium frame.
Media
Progressive density fiberglass media pad
Frame
Highest wet strength beverage board or reusable alumunium frame
G3
Recommended Final Pressure
1″W.G. (250 Pa)
Maximum Operating Temperature
60°C
Available in any size , Customized & Performance Guaranteed
PRE Filters
G Series
Higher moisture resistance media, no wiremesh support/no corrosion. Frame: Strength Beverage cardboard Ex: Canada or reusable alumunium frame. Intended to trap relatively coarse dust particles, this pleated filter is commonly used as pre-filter to extend the service life of higher efficiency filters. Conventional blue media with wiremesh support.
Media
Rigid synthetic media without wire mesh or conventional with wire mesh
Frame
Highest wet strength beverage board or reusable alumunium frame
EN 779 Class
G4
U.L Classification
U.L Class 2
Maximum Temperature
60°C
Efficiencies
25% – 30%
Recommended Final Pressure
1″W.G. (250 Pa)
Available in any size , Customized & Performance Guaranteed
PRE Filters
G4GT Pads
IAF G4GT PADS features progressive density fiberglass media pad allowing for full depth filtration. The adhesive-coated fibers purpose to retent dusts which have been captured, thus minimizing dusts by-pass. Due to the media’s high dust loading capacity, G4GT PADS best functions as heavy-duty pre-filter to extend the life of higher efficiency filter (MBGTTXT) in a dusty environment especially for gas turbine.
Media
Progressive density fiberglass media pad
Recommended Final Resistance
2.0”W.G. (500 Pa)
EN 779 Class
G4
Capacity
Up to 2000 CFM
Average arrestance
90%
Initial Resistence
30 Pa @ 1000 CFM, 85 Pa @ 2000 CFM
Maximum Operating Temperature
80’C
Available in any size , Customized & Performance Guaranteed
PRE Filters
VNF 290 , VNF 300 ( All Rounders)
Constructed from seIected high performance, non- breakable fibers in a progressive density multi-layering technique to ensure high depth Ioading with optimal lowest pressure drop performance, to achieve gravimetric arrestance in accordance with En779: 2002 standard ratings
Available in any size , Customized & Performance Guaranteed
PRE Filters
C15-150 / 350 / 500 ( Syntetic Fiber Filter Media )
Designed as the pre filtration of general ventilation equipment mounted in buildings, factories and inlet of air control system. The advanced technology of progressive density with multi-layers can ensure the high dust holding capacity and low pressure drop.
Application
General air control and adjustment instrument + General ventilation system including mass transit vehicles like train, subway, etc.
Pre-filtration of air inlet system + Pre filtration of spray painting.
Quality Guarantee
Tested according to EN779:2002 and DIN CERTCO to ensure the product quality conform DIN53438-F1. UL900-Class 1.
Available in any size , Customized & Performance Guaranteed
PRE Filters
CC " Arrester" (CC 600 , FF 560 )
Specially designed for terminal filtration of auto spray-Paint as the final filtration barrier With characteristics of high dust holding capacity, low pressure drop and economical. Adhesive and enhanced rigidity ensure high dust holding capacity and robust construction.
Available in any size , Customized & Performance Guaranteed
PRE Filters
Roll Automatic ( ROM )
We are Manufacturing also Roll Automatic Machines available Powder Coating Mild Steel, Stainless Steel Housing, any sizes. Sensor: Timer, Differenliat Pressure, Photocell.
Available in any size , Customized & Performance Guaranteed
PRE Filters
Paint Arrestor
PRE Filters
FHT 100 / 200
Coarse Filter Barrier for high temperature curing ovens to prevent fouling of product surface
self-extinguishing according to DIN 5343-FI
Performace particulars FHT200, when exposed to temperature above 180°C , do slightly discolor from ligh/yellow into toasty brown,but the dis coloration does not affect the integrity or filtration performance of the filter media
Aplication Parameters
FHT 200 = max – operating temperatur 240°C
thickness = 20mm
Rollsize standart = 1 x 20 M / 2 x 20m
FHT 100 = max – operating temperatur 180°C
thickness = 10mm
Rollsize standart = 2 x 20 M / 2 x 40m , 1 x 20 M / 1 x 40m
Available in any size , Customized & Performance Guaranteed
PRE Filters
CKR-080 (Heat Resistance pre-filter)
Heat Resistance pre-filter made of fiberglass
Type : 080
Size : 500x500x50mm / 500x500x25mm
Rated air flow (m³/min) = 1,5/sec = 18
2,5/sec = 30
Initial pressure drop (pa) = 1,5/sec = 157pa
2,5/sec = 343pa
Maximum Operating Temperature
450°C
Available in any size , Customized & Performance Guaranteed
